buy 280 remington near me – find cheap ammunition near me – buy bulk ammo near me – seak ammunition usa – buy bulk ammunition usa

buy 280 remington near me – find cheap ammunition near me – buy bulk ammo near me – seak ammunition usa – buy bulk ammunition usa

Having been released 32 years after the .270 Winchester, it had somewhat unspectacular sales. Remington renamed the cartridge in late 1978 to 7mm-06 Remington. but just before the end of the year they renamed it again, calling it the 7 mm Express in an attempt to increase sales. This resulted in people confusing it with the 7 mm Remington Magnum, and Remington changed the name back to .280 in 1981.The .280 is based on the .30-06 necked down to accept 7 mm (.284 in) bullets, with the neck moved forward .050 in (1.27mm). The neck was deliberately moved forward to prevent chambering in a .270 Winchester rifle, as firing a .280 round in a .270 rifle could cause the projectile to get stuck in the barrel or rupture the barrel due to excessive pressure.The .280 Remington is capable of generating slightly higher velocities in heavier bullet weights (150 grains and above) than the .270 Winchester due to a marginally greater case capacity. However, the ballistic coefficient of equal-weight bullets favors .270 caliber bullets over 7mm (.284) bullets of similar design. In the heavier bullets (150 grains and above) of similar design, the .280 Remington has a slight edge in muzzle energy With equal-weight bullets of similar design, the .270 Winchester surpasses the .280 Remington’s long-range velocity and energy due to the 270’s higher ballistic coefficient according to Federal’s ammunition catalog. There are also many more factory loads available for the .270 Winchester over the .280 Remington at a lower price point due to the .270’s much greater popularity.The .280 Remington is capable of developing energy nearly equal to the .30-06 Springfield, but with lighter bullets having a better ballistic coefficient. The .30-06 produces more energy than the .280 with bullets heavier than 180 grains, though .284″ 175-grain bullets have a high sectional density of .310, compared to the 30-06 180-grain bullet with a moderate sectional density of .271. The .280 is suitable for hunting any game in North America with good shot placement.

SAAMI pressure limit for the .280 Remington is set at 60,000 PSI, 50,000 CUP.

Most American rifle and ammunition manufacturers catalogue the .280 Remington.In Europe the .280 Remington is not popular in bolt-action rifles since it competes directly with the 7×64mm, which is of the almost exact same size as the .280 Remington but has slightly more power, because of having a slightly higher maximum allowed chamber pressure. The .280 Remington does, however, have a larger than expected number of European users in imported self-loading rifles such as those by Remington.

The .30-06 is substantially more popular and manufacturers thus offer a much greater selection of loads at a substantially lower price point.

While it is true that a .280 Remington case can be formed from a .30-06 Springfield case, the case length of a .30-06 is 63.3 millimetres (2.494 in) while the case length of a .280 is 64.5 millimetres (2.540 in), the same as a .30-03 Springfield. However, “The slight difference in length of reformed cases doesn’t make any practical difference.

federal Premium Vital-Shok offers the best constructed bullets available for large game at close to mid-ranges. Fulfill your trophy hunting needs with the variety of Federal Premium’s reliable, non-lead, high-weight retention and copper bullets.

• New production
• Dual-core design
• Brass case, reloadable

Order today!

Key Specifications